


Primer
C110 1K Primer Surfacer
1K Primer is a one-component primer surfacer for fast repair. It provides high performance with a smooth pin hole free surface by quick-drying, and easy sanding.
Specifications
- Type
- One-component primer surfacer (NC primer)
- Substrates
- Sanded and dried finishes, and putty
- Mixing ratio
- 100 : 80–100 (primer : thinner); no hardener
- Hardener
- None — one-component, ready to use after thinning
- Coats & thickness
- 2–3 coats, 25–30 µm (1.0–1.2 mil)
- Flash-off time
- 5–10 mins @ 25°C (77°F) between coats
- Drying time
- 30 mins @ 25°C (77°F)
- Spray gun
- Gravity feed 1.4–1.8 mm; siphon feed 1.7–2.0 mm
- Spray pressure
- Conventional 1.5–2.5 Bar; RP 0.5–2.0 Bar
- Sanding
- Easy sanding; smooth pin-hole-free surface
- Storage
- 24 months @ 20°C (68°F) in a cool, dry place
- Packaging
- 1L, 1KG, 4KG
What it is
1K Primer is a one-component primer surfacer for fast repair. It provides high performance with a smooth pin hole free surface by quick-drying, and easy sanding. It goes over sanded and dried finishes, and putty. Before spraying, remove dust and particles with a degreaser.
Mixing ratio by temperature
C110 is one-component — there is no hardener to mix. Thin it with thinner only, 100 parts C110 NC Primer to 80–100 parts thinner, matched to the booth temperature:
Application
Apply 2–3 coats at 25–30 µm. Allow 5–10 minutes flash-off at 25°C between coats. Spray gun settings: gravity feed 1.4–1.8 mm, siphon feed 1.7–2.0 mm, conventional 1.5–2.5 Bar, RP 0.5–2.0 Bar.
Drying and sanding
C110 dries in 30 minutes at 25°C. Once dry, it sands easily to a smooth, pin-hole-free surface, ready for the basecoat.
C110 or C120 — which primer fits your shop?
Pick C110 when the job is a fast repair and you want the simplest workflow: one component, no hardener to measure, quick drying, easy sanding. Pick C120 2K Primer Surfacer when the job is an overall repair or full refinishing and you need its excellent fill, fast-building qualities and topcoat colour holdout — C120 is a two-component system mixed with C122 Primer Hardener. Both primers go over the same substrates and share the same spray gun settings; the choice is about job size and how much filling you need, not about changing your booth setup.
Get a sample
Ask for a free sample or request a quote. Tell us the repair jobs your shops handle most, and we will confirm whether C110 or C120 fits them better.

