


Basecoat
1K Basecoat Colors
Single-component basecoat with solid colours, metallic and pearl effects. Offers great adhesion and coverage, and weathering resistance. Must be topcoated with a clearcoat for gloss and protection.
Specifications
- Type
- Single-component (1K) basecoat — colour only; clearcoat adds gloss and protection
- Effects
- Solid colours, metallic and pearl effects
- Substrates
- Sanded and dried finishes, 1K or 2K Primers
- Mixing ratio
- 100 : 80–100 (colour : thinner); no hardener
- Thinner
- T01 Fast / T02 Standard / T03 Slow, by temperature
- Coats & thickness
- 2–3 coats, 15–25 µm (0.6–1.0 mil)
- Flash-off time
- 5–10 mins @ 25°C (77°F) between coats
- Air-drying
- 15–20 mins before force drying
- Drying time
- Not stated in TDS — p.17 has no drying table; do not copy the clearcoat / 2K table
- Spray gun
- Gravity feed 1.2–1.5 mm; siphon feed 1.4–1.6 mm
- Storage
- 24 months @ 20°C (68°F) in a cool, dry place
- Packaging
- 1L, 3.75L
What it is
Single-component basecoat with solid colours, metallic and pearl effects. It offers great adhesion and coverage, and weathering resistance. It goes over sanded and dried finishes, and 1K or 2K Primers. Before spraying, remove dust and particles with a tack cloth. This is the first stage of the two-stage system: the basecoat gives the colour, and a clearcoat on top gives the gloss and protection.
Mixing ratio by temperature
There is no hardener in this system — mix colour with thinner only, 100 parts colour to 80–100 parts thinner, matching the thinner to the booth temperature:
Temperature | Thinner |
Below 18°C (64°F) | T01 Thinner 80–100 |
18–24°C (64–75°F) | T01 or T02 Thinner 80–100 |
25–30°C (77–86°F) | T02 or T03 Thinner 80–100 |
Above 30°C (86°F) | T03 Slow Thinner 80–100 |
Application
Apply 2–3 coats at 15–25 µm. Allow 5–10 minutes flash-off at 25°C between coats, and 15–20 minutes air-drying before force drying. Spray gun settings: gravity feed 1.2–1.5 mm, siphon feed 1.4–1.6 mm, conventional 3–4 Bar, RP 2.0–2.5 Bar. Then topcoat with a clearcoat — 777 MS, 850 High Gloss or 900 HS — before the basecoat is left exposed.
Drying
